Replacing a rear turn signal light, Bulb or a tail/brake light bulb -34, Periodic maintenance and minor repair – Yamaha FJR1300T(C) User Manual

Page 77

Advertising
background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-34

6

Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.

Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.

5. Install the headlight bulb cover,

and then connect the coupler.

6. Install the panel.
7. Have a Yamaha dealer adjust the

headlight beam if necessary.

EAU27000

Replacing a rear turn signal
light bulb or a tail/brake light
bulb

1. Remove the passenger seat. (See

page 3-11.)

2. Remove the socket (together with

the bulb) by turning it counter-
clockwise.

3. Remove the defective bulb by turn-

ing it counterclockwise.

4. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

5. Install the socket (together with the

bulb) by turning it clockwise.

6. Install the passenger seat.

1. Do not touch the glass part of the bulb.

1. Turn signal light bulb socket
2. Tail/brake light bulb socket

U5JW12E0.book Page 34 Wednesday, April 28, 2004 10:24 AM

Advertising
This manual is related to the following products: