Zanussi 534261 - Manual

ZANUSSI
P R O F E S S I O N A L
RACK TYPE DISHWASHERS
MODULAR RTM 140
534262
Total installed power - kW 27.4 27.4 27.4 27.4
water flow - liters/hr 240 240 240 240
boiler power - kW 12 12 12 12
boiler capacity - lt. 12 12 12 12
temperature - °C 84 84 84 84
Rinsing
pump power - kW 0.35 0.35 0.35 0.35
tank capacity - lt. 23 23 23 23
temperature - °C 60-70 60-70 60-70 60-70
Duo rinse
pump power - kW 2.2 2.2 2.2 2.2
tank capacity - lt. 100 100 100 100
temperature - °C 55-65 55-65 55-65 55-65
1st wash
height/with open door 1771, 2119 1771, 2119 1771, 2119 1771, 2119
depth 884 884 884 884
width 1773 1773 1773 1773
External dimensions - mm
Insulation l l l l
Air emission - m³/h 180 180
Capacity baskets/h 1st/2nd speed 140, 80 140, 80 140, 80 140, 80
Capacity dishes/h 1st/2nd speed 2520, 1440 2520, 1440 2520, 1440 2520, 1440
cold water inlet °C 15 15
hot water inlet °C 50 50 50 50
pressure min. , max. - bar 1.5, 7 1.5, 7 1.5, 7 1.5, 7
Water supply
Energy Saving Device incl. cond. unit l l
Feeding direction from RH to
LH
from LH to
RH
from RH to
LH
from LH to
RH
Power supply Electric Electric Electric Electric
Model Electronic -
A
Electronic -
A
Electronic -
B
Electronic -
B
RTM140ERA
534260
RTM140ELA
534261
RTM140ERB
534262
RTM140ELB
534263
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
The Zanussi Dishwashing range is produced
for customers with the highest conceivable
demands for good efficiency, economy and
ergonomics for dishwashing operation. The
product range comprises glasswashers,
undercounter dishwashers, hood type
dishwashers, rack type dishwashers and pot
and pan washers. The rack type dishwasher
range is designed to be easily connected
with the equipment included in the Zanussi
Handling System range, to create a
functional and ergonomic dishwashing area.
The rack type dishwasher RTM140 has a
capacity up to 140 racks per hour with 2
speeds (variable on-site). The range consists
of 4 electrically heated models (steam on
request), available with or without Energy
Saving Device (ESD).
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Solid 3mm square stainless steel
sub-frame with bolt-together construction that
can be delivered assembled or in modules to
be connected on site.
� Stainless steel wash pumps ideal for
heavy duty usage installations.
� Brass inlet valves as standard for extra
reliability at high incoming water
temperatures.
� All rear positioned water tubes in stainless
steel.
� Only one cable for electrical connection.
� Electrical and water connections
centralised in one area.
� Service from the front and from the side.
� Pre-arrangements for automatic detergent
dispenser, energy management device and
HACCP implementation (both basic as well
as integrated system).
� Power wash zone where all the soil is
removed with maximum water contact wash
arms for best possible washing result.