ZyXEL Communications ES-2108 Series - Manual (Page 82)

Chapter 7 Basic Setting
ES-2108 Series User’s Guide
82
Figure 38 Basic Setting > Port Setup (ES-2108-G)
The following table describes the labels in this screen.
Table 13 Basic Setting > Port Setup
LABEL DESCRIPTION
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this
row first to set the common settings and then make adjustments on a port-by-port
basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Port This is the port index number.
Active Select this check box to enable a port. The factory default for all ports is enabled. A
port must be enabled for data transmission to occur.
Name Enter a descriptive name that identifies this port. You can enter up to 64 alpha-
numerical characters.
Note: Due to space limitation, the port name may be truncated in
some web configurator screens.
Type This field displays 10/100M for an Ethernet connection and 10/100/1000M for the
Gigabit Ethernet/mini-GBIC slots and 100M for a 100 base-FX fiber-optic port on the
ES-2108-LC or a Fast Ethernet SFP transceiver connection on the ES-2108-F.