XiNCOM XC-DPG603 - Manual (Page 11)

Ensure these settings are suitable for your LAN:
• The default settings are suitable for many situations.
• See the following table for details of each setting.
Figure 3. LAN & DHCP
Configuring the XC-DPG603 for your LAN
11
This is the IP address for the XC-DPG603 when seen from the local LAN. Use the defualt value unless the address is already in use or your LAN is using a
different IP addres range. In the latter case, enter an unused IP Address from within the range used by you LAN
DPG603 is attached (the same value as the PCs on that LAN segment).
DHCP Server Setup - If Enabled, the XC-DPG603 will allocate IP Addresses to PCs (DHCP clients) on your LAN when they start up. The default and
provide the IP address of the XC-DPG603 as the Default Gateway.