Playing songs, Select and listen to a specific song, Mirliton – Yamaha YPT-230 User Manual

Page 22

Advertising
background image

PSR-E233/YPT-230 Owner’s Manual

22

Playing Songs

This instrument has 102 built-in Songs. For this instrument, the term “Song” refers to
the data that makes up a piece of music. Try selecting and listening to the various Songs.

Press the [SONG] button and then select the desired Song, referring to the section
Basic Operation” on page 12 for instructions.
Refer to the Song List on page 39.

Press the [START/STOP] button to play back the Song.
You can stop playback at any time by pressing the [START/STOP] button.

GrandPno

001

001

Song

Start/Stop

DEMO/BGM

Press the [SONG] button to access the SONG
functions (printed above the buttons).

Select and Listen to a Specific Song

• Song number “004” is automat-

ically selected whenever the
power is turned ON. When you
want to select one of the Song
numbers 001–003, use the
number buttons [0]–[9], [+], [-].

• To adjust the tempo of song

playback, see page 27.

• You can adjust the balance

between Song playback and
the notes you play on the key-
board by setting the volume of
the playback sound (page 29
Function 002)
.

SHORTCUT
You can jump directly to the
Function settings by pressing
and holding the [SONG] button
for longer than a second.

NOTE

Mirliton

004

005

Song number

Song name

Rewind/Fast-forward/Pause

[REW] button

............Fast-reverses the Song if pressed during playback (no sound is heard during fast

reverse). Decreases the measure number if pressed while playback is stopped.

[FF] button

................Fast-forwards the Song if pressed during playback. Increases the measure number if

pressed while playback is stopped.

[PAUSE] button

.........Temporarily stops playback. Press this button a second time to resume playback from

the point at which it was stopped.

Advertising