Zebra Technologies 980293-001 - Manual (Page 20)

Problem Solution or Reason
Prints only partial label or
skips a label.
1. Perform AutoSense gap sensor
adjustment on page 8.
2. Label caught on print head.
3. Print head is not properly latched.
4. Possible software problem. Check the
printer memory configuration. Refer to
the EPL2 Programming manual.
Printing stops and STATUS
indicator lights ORANGE or
RED.
1. Perform AutoSense gap sensor adjust-
ment on page 8.
2. Possible problem with label stock. Use
only Eltron approved labels and tags.
3. Possible label jam.
4. Insufficient memory for label size. Check
the printer memory configuration.
5. Possible software problem. Refer to the
EPL2 Programming manual.
14
980293-001 Rev. A
Appendix A - Troubleshooting