Canadian department of communications, Industry canada (ic) notice – Xircom RM56V1 User Manual

Page 26

Advertising
background image

A-10

RealPort Modem 56 User’s Guide

The REN is useful to determine the quantity of devices you may connect to
your telephone line and still have all those devices ring when your telephone
number is called. In most but not all areas, the sum of the RENs of all devices
connected to one line should not exceed five (5.0). To be certain of the
number of devices you may connect to your line, as determined by the REN,
you should contact your local telephone company to determine the maximum
REN for your calling area.

If your telephone equipment causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If possible, they
will notify you in advance. But if advance notice is not practical, you will be
notified as soon as possible. You will be informed of your right to file a
complaint with the FCC.

Your telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in advance to give you an opportu-
nity to maintain uninterrupted telephone service.

If you experience trouble with this telephone equipment, please contact
Xircom, Inc. at (805) 376-9200 for information on obtaining service or repairs.
The telephone company may ask that you disconnect this equipment from the
network until the problem has been corrected or until you are sure that the
equipment is not malfunctioning.

There are no user serviceable parts contained in this equipment.

This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any
person to use a computer or other electronic devices, including fax machines,
to send any message unless such message clearly contains in a margin at the
top or bottom of each transmitted page or on the first page of the transmission,
the date and time it is sent and an identification of the business or other entity,
or other individual sending the message and the telephone number of the
sending machine or such business, other entity, or individual. (The telephone
number provided may not be a 900 number or any other for which charges
exceeds local or long-distance transmission charges.)

In order to program this information into your fax software, you should refer to
the manual of the Fax software being used.

Canadian Department Of Communications

Industry Canada (IC) Notice

This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference Regulations
of the Canadian Department of Communications.

Advertising