Zenith ZN-411 - Manual (Page 10)

19 18
After the batteries are installed and you have
programmed the remote for the codes that operate your
products, you can use your remote to operate a TV, VCR,
Cable Box, etc.
To Operate:
1. Press the TV, VCR, DVD, CBL,
etc. button (depending on
which product you want to
operate).
2. Aim the remote at the product.
3. Press POWER to turn on the
product.
4. Press other buttons to operate
the features of your product.
TV (Press TV First)
VCR
(Press VCR First) DVD Player
(Press DVD first)
Product Operation
Cable Box
(Press CBL first) CD Player
(Press CD first)
Troubleshooting
Remote does not operate your product.
• Press the mode button of the product you want to
control.
• Program the remote with a new code.
• Install new batteries. (You might have to reprogram
your remote after installing new batteries.)
• Remote may not be compatible with your product.
Remote does not operate some features of your product.
• Program remote with a new code.
• Remote may not be able to operate all features of
your product or button names might be different
than your product.
Indicator light blinks after you program a product
code.
• Remote did not accept the code.
• Try to program the code again or try a different
code.