Xingtel Xiamen Electronics XL-2031IDW - Manual (Page 12)

Select the RING TYPE and press dial button to confirm.
Use
or t button to select the desired ringer melody(up to 11
kinds) or standard ring.
Press dial button to confirm.
Select the RING VOLUME and press dial button to confirm
Use
or t button to select the desired ringer volume(up to 4
kinds), if you would not like the ringer to disturb you, you can
select the RING OFF to deactivate the function.
Press dial button to confirm.
s
s
1.
2.
2. SET THE RING
Press dial button when the LCD show SET RING to enter the setting,
use
or t button to select the sub-menu. s
Select the BACK LIGHT TIME and press dial button to confirm.
Use
or t button to select the desired bright time (10s/20s/30s),
You can also select the OFF to deactivate the function.
Press dial button to confirm.
s
1.
2.
3. SET THE BACK LIGHT
This telephone has special back light function in on-hook and off-hook
state. Whenever you press any button or pick up the handset, the back
light will be bright. Press dial button when the LCD shows BACK LIGHT
to enter the setting, use or
t button to select the sub-menu.
a. Set the back light time
If you want the light to keep bright in the off-hook state, you can enter
the OFF HOOK LIGHT setting and select the ALL THE TIME.
s
SET RING RING TYPE
RING VOLUME
BACK LIGHT BACK LIGHT TIME
OFF HOOK LIGHT
BACK LIGHT TYPE
1.
2.
3.
or
3.
3.
or
Select the BACK LIGHT TYPE and press dial button to confirm.
Use
or t button to select the desired back light type(up to 7
kinds.)
Press dial button to confirm.
s
1.
2.
3.
5. TIME SETTING
Press dial button when the LCD shows SET TIME , use or
t button to
select the correct number. Press dial button to confirm and move to
the next digit, press del button to exit.
NOTE:
6. LANGUAGE SETTING
The unit support multi languages, including
English1, Greek,
Australian, English2, Spanish, Nederland,
French, German, Polish, Swedish, Danish, Finnish and Norwegian .
Press dial button when the LCD shows SET LANGUAGE to enter the
language setting. Use or
t button to select the language. Press
dial button to confirm and exit.
s
Czech, Slovak, Turkish,
s
When you receive a first call to this unit, time and date will be set
automatically if you have Caller ID service ( FSK standard).
or t
The setting sequence is hour - minute - month - day - year - week.
After the year setting, the cursor for week will flash, you can use
s
button to activate/deactivate this setting. If it is activated, the
week will set automatically, or in stead of showing the week day,
the LCD will only show the "TOTAL CALLS XX"in the standby state.
You need to select the year to ensure the week displays correctly.
1.
2.
3.
4. LCD CONTRAST SETTING
Press dial button to enter the LCD contrast setting when the LCD
shows LCD CONTRAST, then the current contrast level ( HI/LO )
will show on the LCD. Press
s or t button to make a selection,
press dial button to confirm and exit.
9 10