Yamaha YZFR6V(C) - Manual (Page 34)

INSTRUMENT AND CONTROL FUNCTIONS
3-16
3
Passenger seat
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it clockwise.
2. While holding the key in that posi-
tion, lift the front of the passenger
seat and pull it forward.
To install the passenger seat
1. Insert the projections on the rear of
the passenger seat into the seat
holders as shown, and then push
the front of the seat down to lock it
in place.
2. Remove the key.
NOTE:
Make sure that the seats are properly
secured before riding.
EAU39072
Helmet holding cable
A helmet holding cable is provided in
the owner’s tool kit to secure two hel-
mets to the helmet cable holder
equipped on the bottom of the passen-
ger seat.
To secure a helmet with the helmet
holding cable
1. Remove the passenger seat. (See
page 3-15.)
2. Clip the middle snap hook of the
cable onto the cable holder.
1. Projection
2. Seat holder
1. Passenger seat lock
2. Unlock.
1. Projection
2. Seat holder
1. Helmet holding cable
2. Helmet cable holder
3. Middle snap hook
U2C010E0.book Page 16 Wednesday, October 26, 2005 10:19 AM