ZyXEL Communications P-334W - Manual (Page 308)

Prestige 334W User’s Guide
23-12 Menu 3 LAN Setup
Figure 23-10 Menu 3.5.2 Roaming Configuration
The following table describes the fields in this menu.
Table 23-6 Menu 3.5.2 Roaming Configuration
FIELD DESCRIPTION
Active Press [SPACE BAR] and then [ENTER] to select Yes to enable roaming on the Prestige if
you have two or more Prestige’s on the same subnet.
Port # Enter the port number to communicate roaming information between access points. The
port number must be the same on all access points. The default is 3517. Make sure this port
is not used by other services.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Menu 3.5.2 - Roaming Configuration
Active= Yes
Port #= 3517
Press ENTER to Confirm or ESC to Cancel: