Figure 420 menu 24.11 – remote management control, Table 219 menu 24.11 – remote management control – ZyXEL Communications ZyWALL 2 Plus User Manual

Page 596

Advertising
background image

Chapter 43 Remote Management

ZyWALL 2 Plus User’s Guide

596

Figure 420 Menu 24.11 – Remote Management Control

The following table describes the fields in this screen.

Menu 24.11 - Remote Management Control

TELNET Server: Port = 23 Access = LAN
Secure Client IP = 0.0.0.0
FTP Server: Port = 21 Access = LAN+WAN+DMZ+WLAN
Secure Client IP = 0.0.0.0
SSH Server: Certificate = auto_generated_self_signed_cert
Port = 22 Access = LAN+WAN+DMZ+WLAN
Secure Client IP = 0.0.0.0
HTTPS Server: Certificate = auto_generated_self_signed_cert
Authenticate Client Certificates = No
Port = 443 Access = LAN+WAN+DMZ+WLAN
Secure Client IP = 0.0.0.0
HTTP Server: Port = 80 Access = LAN+WAN+DMZ+WLAN
Secure Client IP = 0.0.0.0
SNMP Service: Port = 161 Access = LAN+WAN+DMZ+WLAN
Secure Client IP = 0.0.0.0
DNS Service: Port = 53 Access = LAN+WAN+DMZ+WLAN
Secure Client IP = 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Table 219 Menu 24.11 – Remote Management Control

FIELD

DESCRIPTION

Telnet Server

FTP Server

SSH Server

HTTPS Server

HTTP Server

SNMP Service

DNS Service

Each of these read-only labels denotes a service that you may use to remotely

manage the ZyWALL.

Port

This field shows the port number for the service or protocol. You may change the

port number if needed, but you must use the same port number to access the

ZyWALL.

Access

Select the access interface (if any) by pressing [SPACE BAR], then [ENTER] to

choose from: LAN, WAN, LAN+WAN, DMZ, LAN+DMZ, WAN+DMZ,

LAN+WAN+DMZ, WLAN, LAN+WLAN, WAN+WLAN, LAN+WAN+WLAN,

DMZ+WLAN, LAN+DMZ+WLAN, WAN+DMZ+WLAN, LAN+WAN+DMZ+WLAN

or Disable.

Secure Client IP

The default 0.0.0.0 allows any client to use this service to remotely manage the

ZyWALL. Enter an IP address to restrict access to a client with a matching IP

address.

Certificate

Press [SPACE BAR] and then [ENTER] to select the certificate that the ZyWALL

will use to identify itself. The ZyWALL is the SSL server and must always

authenticate itself to the SSL client (the computer which requests the HTTPS

connection with the ZyWALL).

Advertising