Yamakawa MP-28 - Manual (Page 12)

Turning the power on and off
If you turn power off by pressing the POWER
on the remote control during playback, playback
will continue from the point where playback
stopped when the power is turned ON again.
The play position memory is released if the disc
is removed.
Play Position Memory Function
Press POWER button
1
The power turns on.
To turn the power off, Press POWER
button again.
2
9
Turning the power on and off
Adjusting the volume
Adjusting the volume
3
Press the VOL button first, then press or button to decrease or increase the volume.
VOL
POWER
Tuning the sound on and off
During playback press MUTE , no sound
is played. Press Mute to resume normal
playback with sound.
VOL Or
Playing a disc
Caution
With some DVDs, certain operations are disabled.
Such operations are not possible on such DVDs. The DVD functions described in this
manual are not supported by all instructions for details on the features supported.
Fingerprints on a disc may adversely affect playback. If a problem occurs,
remove the disc and check for fingerprints on the playback side.
Clean the disc if necessary.
When using the remote control, be careful to pressing multiple buttons at the same
time may cause erroneous operation.
DVD VCD MP3 CD
Tuning the sound on and off