Zoombak Car and Family GPS Locator - Manual (Page 8)

Using the Car Locator
This section addresses five primary areas:
• Charging the Battery
• Battery Life
• Powering the Car Locator ON/ OFF
• Monitoring the Car Locator Status
• Placing the Locator In Your Car
Charging the Battery
Before using the Zoombak Car Locator for the first time, you will
need to fully charge the battery. Follow these simple instructions to
charge the battery. The initial battery charge time will be 6 hours;
each subsequent battery charge will be approximately 4 hours.
1. Remove the Zoombak Car Locator and AC Wall Charger from the
Zoombak Car Locator package.
2. Plug the AC Wall Charger into a wall outlet.
3. Attach the Zoombak Car Locator to the AC Wall Charger via the
USB Charger Jack on the Zoombak Car Locator.
4. The Locator Status LED indicator will glow amber (yellow),
indicating that the Zoombak Car Locator is charging.
5. Once the Locator Status LED glows green this will signal that the
Zoombak Locator is fully charged.
4 zoombak.com