Yamaha YPT-300 - Manual (Page 41)

Play With a Variety of Effects
PSR-E303/YPT-300 Owner’s Manual
41
Adding Reverb
Reverb adds the ambience of a room or concert hall to the sound that you
play on the keyboard.
Press the [REVERB ON/OFF] button to turn Reverb on. Reverb is normally
on. You can check how the selected Reverb Type sounds by playing the key-
board. To turn Reverb off, press the [REVERB ON/OFF] button again.
The ideal type is automatically selected whenever you select a Song or
Style, but you can select any of the available Reverb Types.
1
Press and hold the [REVERB ON/OFF] button for longer than a sec-
ond. “REVERB” appears in the display for a few seconds, followed by
the Reverb Type.
● How to sound each Harmony Type
• The harmony notes can be
added only to the Main
Voice, not to Dual or Split
Voices.
• The keys left of the Split
Point of the keyboard pro-
duce no harmony notes
when the auto accompani-
ment is on (ACMP ON is lit).
NOTE
• Harmony type 01-05
• Harmony type 06-12 (Trill)
• Harmony type 13-19 (Tremolo)
• Harmony type 20-26 (Echo)
You can adjust the Harmony Volume in the Function Settings (page 56).
Press the right-hand keys while play-
ing chords in the auto accompaniment
range of the keyboard when the Auto
Accompaniment is on (page 23).
Hold down two keys.
Keep holding down the keys.
Keep holding down the keys.
To add Reverb
Appears when
Reverb is on.
Select a Reverb Type
Hall2 02 Currently selected Reverb Type
Hold for longer
than a second.