Verifying settings 143, Macintosh os x 143, Figure 84macintosh os x: apple menu 143 – ZyXEL Communications P-660R-Tx v2 Series User Manual
Page 142: Macintosh os x, Verifying settings
P-660R-Tx v2 Series User’s Guide
143
4 For statically assigned settings, do the following:
•
From the Configure box, select Manually.
•
Type your IP address in the IP Address box.
•
Type your subnet mask in the Subnet mask box.
•
Type the IP address of your ZyXEL Device in the Router address
box.
5 Close the TCP/IP Control Panel.
6 Click Save if prompted, to save changes to your configuration.
7 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.
Macintosh OS X
1 Click the Apple menu, and click System Preferences to open the System Preferences
window.
Figure 84 Macintosh OS X: Apple Menu
2 Click Network in the icon bar.
•
Select Automatic from the Location list.
•
Select Built-in Ethernet from the Show list.
•
Click the TCP/IP tab.
3 For dynamically assigned settings, select Using DHCP from the Configure list.