Yard-Man 5KL - Manual (Page 26)

26
Safety & Decorative Labels
OPERATORS VIEW
(MODEL PLATE)
KEEP AWAY FROM ROTATING IMPELLER AND AUGER. CONTACT WITH IMPELLER OR AUGER CAN AMPUTATE HANDS AND FEET. USE CLEAN-OUT TOOL TO UNCLOG DISCHARGE CHUTE. DISENGAGE CLUTCH LEVERS, STOP ENGINE, AND REMAIN BEHIND HANDLES UNTIL ALL MOVING PARTS HAVE STOPPED BEFORE UNCLOGGING OR SERVICING MACHINE.
TO AVOID THROWN OBJECTS INJURIES, NEVER DIRECT DISCHARGE AT BYSTANDERS. USE EXTRA CAUTION WHEN OPERATING ON GRAVEL SURFACES.
READ OPERATOR'S MANUAL.
1.
2.
3.
4.
5.
DANGER
CLEAN-OUT TOOL DANGER
AVOID INJURY FROM
ROTATING AUGER -
KEEP HANDS, FEET
AND CLOTHING AWAY.
777S32066
DANGER
NEVER PUT HAND IN CHUTE. CONTACT WITH
ROTATING PARTS CAN AMPUTATE FINGERS
AND HANDS.
SHUT OFF ENGINE AND WAIT UNTIL ALL
MOVING PARTS HAVE STOPPED BEFORE
UNCLOGGING.
USE CLEAN-OUT TOOL OR WOODEN STICK TO
UNCLOG DISCHARGE CHUTE.
777S32236
777I22334
777I22347
CHUTE DIRECTIONAL CONTROL
CHUTE TILT DOWN
CHUTE TILT UP
1.) INSERT IGNITION KEY AND SNAP IN PLACE. 2.) SET CHOKE AND THROTTLE TO FULL (ON) POSITION. PUSH PRIMER BUTTON 3x.
3.) ROPE START: PULL SLOWLY UNTIL HARDER TO PULL,
THEN PULL RAPIDLY TO START. REPEAT
PRIMING IF NEEDED.
ELECTRIC START: DO NOT USE IN RAIN. CONNECT POWER
CORD AND PUSH STARTER BUTTON.
REPEAT PRIMING IF NEEDED.
4.) MOVE CHOKE SLOWLY TO OFF POSITION. 5.) TO STOP ENGINE: MOVE THROTTLE TO STOP POSITION.
STARTING INSTRUCTIONS:
PUSH BUTTON CHUTE ROTATE LEFT PUSH BUTTON CHUTE ROTATE RIGHT
LEFT TURN TRIGGER CONTROL SHEAR PIN STORAGE
GO GO
AUGER CONTROL DRIVE CONTROL RIGHT TURN TRIGGER CONTROL
777D08384
777D08367
Electric Start • Single Hand Operation • 12" Impeller
9.5 HP / 26"
¨
D08384 AC
POWER STEERING
™
777I22363
DRIVE
AUGER
LOCK