Zephyr AHZ-M90ARX - Manual (Page 14)

www.zephyronline.com
5. Install the plate with the fl ange facing
the wall, inside the motor casing: carry
out the instructions at stage 3 in rever-
se order then use the screws provided
to complete installation. (Tot. 12 type
B). (Note! If air is discharged from the
top, rotate the plate and install it in the
opposite direction with the fl ange fa-
cing upwards) Fig.5
6. Put the top cover back on.
7. Open the fl ap Fig.6
8. With the aid of a slotted screwdriver,
break the grommet of circular hole
through which the wires pass. Fig. 7
9. Insert the female connector in the
terminal box already attached to the
hood. Fig. 8A
Installa
tion - Ex
ternal & In-Line Blo
w
er P
repar
a
tion
- 14 -