Yamaha R-V902 - Manual (Page 16)

1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
3
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
4
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
5
Center channel mode indicators
The name of a selected center channel mode lights up only
when a program which uses the Dolby Pro Logic Surround
decoder is selected.
6
EFFECT OFF indicator
Lights up if neither the digital sound field processor nor the
Dolby Pro Logic Surround decoder is on. In this state, sound
output is 2-channel stereo.
7
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. During this period, the displayed station
can be programmed to the memory by using the A/B/C/D/E
button and the preset station number selector buttons.
8
AUTO indicator
Lights up when this unit is in the automatic tuning mode.
9
TAPE MONITOR indicator
Lights up when the tape deck (or MD recorder etc.) is selected
as the input source by pressing the TAPE (MD) MON button.
0
DSP program indicators
The name of a selected DSP program lights up when the built-
in digital sound field processor and/or the Dolby Pro Logic
Surround decoder is on.
16
DISPLAY PANEL
PRESET
kHz
MHz
MEMORY AUTO
SLEEP
TAPE MONITOR
STEREO ms dB
PRO LOGIC
ENHANCED CONCERT
VIDEO
MONO
MOVIE STADIUM
DISCO ROCK CONCERT
CONCERT HALL
NORMAL
WIDE
PHANTOM
EFFECT OFF 0 20 l00 40 60
1 2 3 4 5 6
8 7 9 0