Zenith DXG-210 - Manual (Page 9)

17 16 17
6.2 Set-up menu
Set-up menu
In the set-up menu the following
sub-menus are available:
•
Picture orientation
•
Language
•
Quick key assignment
•
ZAP keys assignment
•
Accumulated lamptime
6.2.1 Picture orientation
Picture orientation
The picture orientation menu is used for
rotating and mirroring the picture.
Normal
Normal is used when the projector is standing
on a table projecting a picture on a screen.
Mirror
Mirror is used when the projector is projecting
a picture from behind the screen
Rotate
Rotate is used when the projector is ceiling
mounted and projecting an image from the
front.
Rotate and mirror
Rotate and mirror is used when the projector
is ceiling mounted and projects the picture
from behind the screen.
Auto set-up
Auto set-up will do automatic set-up of the
projector:
•
Horizontal and vertical position
•
Sampling clock
•
Phase
•
Chooses between available video formats
and NTSC/PAL auto detection
Source
You can connect three different sources to the
projector; one computer source, two video
sources.
You select the source you want to use by click-
ing on the icon representing the source. Use
the pressure-sensing pad on the remote mouse
to move the mouse pointer to an icon and
click the button (left mouse) underneath the
remote mouse.
Set-up menu
In this menu you set up the projector with
settings that will not be changed often, e.g.
language or picture orientation.
Control panel
In this menu you can make adjustments for
picture.
Removing the main menu
To remove the menu system, press the MENU
key on the Remote control. You can also
remove the menu by clicking the right mouse
button (on the top of the remote control). The
right mouse button will also function as cancel
when in the menus.
The menu will disappear in 40 seconds.
Product information
Click on the product information icon for
information about the product and support.
Press the main menu button again to
exit this screen.