ZyXEL Communications Prestige 2002 - Manual (Page 36)

P-2002 Series User’s Guide
36 Chapter 3 System Screens
Figure 9 System General
3.4 Configuring Password
To change your Prestige’s password (recommended), click SYSTEM in the navigation panel,
and then the Password tab. The screen appears as shown. This screen allows you to change
the Prestige’s password.
Figure 10 Password
The following table describes the labels in this screen.
Table 4 System General
LABEL DESCRIPTION
System Name This is for identification purposes. Enter your computer's "Computer Name".
Domain Name The Domain Name entry is what is propagated to the DHCP clients on the LAN. If
you leave this blank, the domain name obtained by DHCP from the ISP is used.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session
times out. The default is 5 minutes. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks. A value of "0"
means a management session never times out, no matter how long it has been left
idle (not recommended).
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.