Zenith DVR313 - Manual (Page 29)

D
VR HOOKUP
29
Using the Built-in TV Tuner
Changing TV Channels
If no disc is playing, you can change TV channels using
the number or CH (v / V) buttons on the remote control,
or the CH (+/–) buttons on the front panel.
ote
Antenna channels are numbered 2 through 69. Cable
channels are numbered 1 through 125.
Changing TV Audio Channel
Some TV programs are broadcast with both a main and
a Secondary Audio Program (SAP). You can change the
TV audio using the AUDIO button.
Press AUDIO repeatedly to change the TV audio.
Stereo
→ SAP → Mono → Stereo
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being
broadcast, you will still hear the main audio channel.
• If the sound is of poor quality when set to Stereo, you
can often improve it by changing to Mono.
• When an external input is selected, the audio channel
can be switched only to Stereo.
Displaying OSD While Watching TV
Press ENTER to display/remove the information dis-
played on-screen.
2003-3-8 11:35am
CATV 11
MONO
Video
Disc type indicators
Indicates channel number and audio signal
received by the tuner.
Indicates current date and time.