ZyXEL Communications Version 1.03 - Manual (Page 169)

Chapter 16 Ethernet Port Configuration
NetAtlas Workgroup User’s Guide
169
The following table describes the fields in this screen.
16.7 Port Mirroring
Port mirroring allows you to copy traffic going from one or all ports to another or all ports in
order that you can examine the traffic from the mirror port (the port you copy the traffic to)
without interference.
You must first select a monitor port. A monitor port is a port that copies the traffic of another
port. After you select a monitor port, configure a mirroring rule in the related fields.
To open the Port Mirroring screen, right-click on the switch in the Device List Panel, and
click Configuration > Ethernet Port > Port Mirroring. Then select a device and the port(s)
to which you want to apply this configuration.
Figure 119 Ethernet Port Configuration: Port Mirroring
Table 84 Ethernet Port Configuration: Port 802.1x
LABEL DESCRIPTION
802.1x Active Select this check box to permit IEEE 802.1x authentication on this port. You
must first allow IEEE 802.1x authentication on the switch before configuring
it on each port.
Reauthentication Select On from the drop-down list box to periodically prompt a subscriber to
re-enter his or her username and password to stay connected to the port.
Reauthentication Timer Specify how often a client has to re-enter his or her username and password
to stay connected to the port.
Apply Click Apply to save the changes.