Yamaha HTR-5490 User Manual
Page 50
46
REMOTE CONTROL FEATURES
CLEAR
CLEAR
CLEAR
Clearing Learned Functions,
Renamed Source Names, and
Setup Manufacturer Codes
1
Press an input selector button or Å to select
the area for which you want to clear the
name, function or manufacturer code.
2
Press CLEAR by using a ballpoint pen or
similar object.
Note
• If you do not press any button within 30 seconds during steps 2
and 3, the clearing process is canceled. If this happen, start over
from step 1.
3
Press u / d to select the clear mode.
The mode is shown in the display window in the
following order:
4
Press and hold CLEAR again for about 3
seconds.
“C:OK” appears in the display window.
Note
• “C:NG” appears in the display window if the operation is
unsuccessful. In this case, start over from step 2.
5
Press CLEAR to exit from the clearing mode.
Once you have cleared a learned function or macro
for a button, the button reverts to the factory setting.
Note
• “ERROR” appears in the display window when pressing
buttons other than indicated in each step, or more than one
button at once.
PHONO
POWER
SLEEP
STANDBY
6CH INPUT
SYSTEM
V-AUX
A
D-TV/LD
VCR2/DVR
VCR 1
DVD
CBL/SAT
MD/TAPE
CD-R
TUNER
CD
(L: name of a component) Clears
all learned functions for the
component area.
Clears all learned functions for
this unit control area.
Clears all learned functions.
Clears all renamed source names
in the display window.
Clears all programmed functions
including setup manufacturer
codes. This returns to the factory
settings.
TV VOL
PRESET
PRESET
TV MUTE
TV VOL
SELECT
CH
CH
+
+
–
–
0108HTR5490_42-51_EN(UA)
01.7.6, 6:12 PM
46