ZyXEL Communications P-2602HWLNI - Manual (Page 136)

Chapter 9 Wireless LAN
P-2602HWLNI User’s Guide
136
Figure 70 Wireless: Static WEP Encryption
The following table describes the wireless LAN security labels in this screen.
9.5.3 WPA(2)-PSK
In order to configure and enable WPA(2)-PSK authentication; click Network > Wireless
LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security
Mode list.
Table 38 Wireless: Static WEP Encryption
LABEL DESCRIPTION
Security Mode Choose Static WEP from the drop-down list box.
Passphrase Enter a Passphrase (up to 32 printable characters) and click Generate. The ZyXEL
Device automatically generates a WEP key.
WEP Key The WEP key is used to encrypt data. The ZyXEL Device and all the wireless APs
must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5, 13 or 29 characters (ASCII
string) or 10, 26 or 58 hexadecimal characters ("0-9", "A-F") for a 40/64-bit, 128-bit or
256-bit WEP key respectively.