Zanussi ZHC 951 User Manual

Page 10

Advertising

123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifications or attempt to modify this product in any way.

Technical information

DIMENSIONS

HEIGHT OF CANOPY:

(incl glass visor)

46mm

HEIGHT OF CHIMNEY:

(UPPER SECTION)

215mm

(LOWER SECTION)

740mm

WIDTH OF CANOPY:

(incl glass visor)

898mm

DEPTH OF CANOPY:

(incl glass visor)

700mm

ELECTRICAL SUPPLY

VOLTAGE:

(~50Hz)

230V

POWER CONSUMPTION:

230W

FAN MOTOR:

150W

LAMPS:

(4x20W)

80W

SUITABLE FOR -
INSTALLATION ABOVE:

ELECTRIC HOB:

7KW (MAX)

GAS HOB:

10KW (MAX)

SLOT-IN ELECTRIC COOKER:

12.4KW (MAX)

SLOT-IN GAS COOKER:

13.5KW (MAX)

DOUBLE INSULATED DO NOT EARTH

Electrical Requirements

Any permanent electrical installation must
comply with the latest I.E.E. Regulations and
local Electricity Board regulations. For your own
safety this should be undertaken by a qualified
electrician e.g. your local Electricity Board, or a
contractor who is on the roll of the National
Inspection Council for Electrical Installation
Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure
that the mains voltage corresponds to the
voltage on the rating plate inside the cooker

Note: CE Marking certifies that this appliance complies with the
requirements laid down in EEC directive 89:336 (Electromagnetic
compatibility) and subsequent modifications and Low Votage directive
72/23/E.

This appliance is fitted with a 2 core mains
cable and must be permanently connected to
the electricity supply via a double-pole switch
having 3mm minimum contact gap on each
pole. A Switched Fuse Connection Unit to
BS.1363 Part 4, fitted with a 3 Amp fuse, is a
recommended mains supply connection
accessory to ensure compliance with the Safety
Requirements applicable to fixed wiring
instructions.

This appliance conforms to BS.800:1988 and
EEC Directive No. 78 308 regarding
suppression of radio and television interference.

12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901

INSTALLING THE COOKER HOOD

Unpacking

The hood is supplied with the following
components for installation as illustrated.
Item

Qty

Description

Hood body, complete with:
Controls, lighting, blower and
filters

Telescopic chimney comprising:

2.1

Upper section

2.2

Lower section

7.1

Telescopic frame complete with
extractor, consisting of:

7.1a

Upper frame

7.1b

Lower frame

Right-hand air outlet grille

Left-hand air outlet grille

Ø120-125mm Ducting collar

Ø150-120mm Ducting spigot

Recirculation extension ducting

14.1

Recirculation extension ducting

Recirculation spigot

Junction box

Jubilee Clips

Item

Qty

Installation Components

12c

Ø2.9 x9.5mm Chimney fixing
screws

12e

Ø2.9 x6.5mm Junction box
fixing screws

12f

M6x10mm Hood body fixing
screws

12g

M6x80mm Lower frame fixing
screws

12h

Ø5.2x70mm Upper frame fixing
screws

Ceiling drilling template

Item

Qty

Documents

Instruction Manual

7.1a

7.1

12h

7.1b

2.1

2.2

12c

12g

12f

12e

12c

14.1

12c

Advertising

Popular Brands

Popular manuals