Yamaha HTR-5730 - Manual (Page 39)

37
English
AD
V
ANCED
OPERA
TION
English
Adjusting the items on the set
menu
Use the remote control to make adjustments.
y
• You can change set menu parameters while the unit is
reproducing sound.
• You can use NEXT and SET MENU +/– on the front panel to
change these settings, if the unit is not set to TUNER mode.
Press NEXT to select the category or field you wish to change,
and SET MENU +/– to change the parameters.
Note
• You cannot change some set menu parameters while the unit is
in night listening mode.
1
Press AMP.
2
Press SET MENU to enter
the set menu.
3
Press u / d repeatedly to select the desired
menu.
4
Press j / i to enter the selected menu.
5
Press u / d repeatedly to select the item
you want to adjust.
y
• By pressing SET MENU repeatedly, you can select items in
the same order as when pressing d.
AMP
SET MENU
Set menu list
The set menus are divided by use and function into the 4
categories listed here.
■ BASIC MENU
The BASIC MENU contains the basic parameters that you
must set before using this unit. It consists of the following
menus. See pages 18 – 20 for a detailed explanation.
1 SETUP
2 SP LEVEL (Speaker level)
■ SOUND MENU
The SOUND MENU contains parameters for altering
sound output. It consists of the following menus that you
can use to alter the quality and tone of the sound output
by the system.
1 SPEAKER SET
2 SP DISTANCE (Speaker distance)
3 LFE LEVEL (Low frequency effect level)
4 D. RANGE (Dynamic range)
5 CENTER GEQ (Center graphic equalizer)
6 HP TONE CTRL (Headphone tone control)
■ INPUT MENU
The INPUT MENU contains parameters concerned with
signal input. It consists of the following menus that you
can use to change the assignment of input jacks.
1 I/O ASSIGN
2 INPUT MODE
■ OPTION MENU
This is a supplementary set up menu provided for your
convenience. It consists of the following menus that you
can use to change display brightness, protect existing
settings, and perform other non-essential functions.
1 DISPLAY SET
2 MEM. GUARD
3 AUDIO MUTE
• In the descriptions for each item from the following page, the
default setting is indicated in bold.
SET MENU
A/B/C/D/E
MENU
SELECT + –
PRESET/CH
+10 9
STEREO 6.1/5.1 NIGHT /DTS
8 7 6 5
MOVIE2 MOVIE1 TV THTR MUSIC
4 3 2 1
ENTERTAINMENT ROCK JAZZ HALL
TV
AMP
MUTE
INPUT MUTE
VOLUME
+
–
+
–
+
–
CH VOL
SET MENU
SELECT
PRESET/CH
A/B/C/D/E
LEVEL
MENU
TEST
RETURN DISPLAY
TITLE
+ –
0 ENTER
2
3,5,8
4,6,7
1
8
You can set the following parameters on the set menu to obtain a better sound from the unit. Change the settings to
reflect the needs of your listening environment.