Zoom 0335-A 27337 - Manual (Page 10)

10 ADSL Bridge Modem User’s Guide
2222
Open your Web browser (for example, Internet Explorer or
Netscape Navigator) and try to connect to a familiar Web
address.
! If you connect successfully, your installation is complete
and you are ready to use the modem with your computer.
You are done with this user’s guide, unless you want to use
the modem with a router. To do that, please continue
below with Using a Router with Your ADSL Bridge
Modem.
! If you are unable to access the Web, wait a few minutes
and try again. Your modem may need more time to
establish a connection with your Internet service provider.
If you are still unable to connect after a few minutes, refer
to Appendix A: Troubleshooting Tips on page 37.
Using a Router with Your ADSL Bridge Modem
Disconnect the ADSL Bridge modem from your computer, and
then connect the ADSL Bridge modem to your router’s WAN
Ethernet port. In setting up your router according to its
instructions, please note the following:
• If you are using DHCP, the WAN port of the router must be
set up to use DHCP.
• If you are using a static IP address, you must specify that
address for the WAN port of the router. The computers
connected to the LAN ports of the router should have their
TCP/IP settings set for DHCP.
• If your Internet service provider gave you PPPoE client
software, you must set up your router to terminate a PPPoE
connection.