Yamaha RC-D24 - Manual (Page 7)

Touring the RC-D24
4
RC-D24—Owner’s Manual
C RTN TO ZERO button
This button is used to locate the zero position.
D LAST REC IN & OUT buttons & indicators
These buttons are used to set and locate the LAST REC IN and LAST REC OUT points.
The IN and OUT indicators light up when the respective IN or OUT point is set.
E PROJECT SEARCH buttons
These buttons are used to search for projects. Pressing the [ ] button selects the top
of the current project. Pressing the [ ] button selects the top of the next project.
F AUTO PUNCH button & indicator
This button selects the Auto-Punch In/Out function. The AUTO PUNCH indicator
flashes when this function is on.
G SET button
This button is used in conjunction with the LAST REC [IN], LAST REC [OUT], [A],
and [B] buttons to set the LAST REC IN, LAST REC OUT, A, and B points, respectively.
It’s also used in conjunction with the [RTN TO ZERO] button to set the relative zero
position.
The [SET] button is also used in conjunction with the [ENTER] button for the Auto
Locate Memory Store function, and in conjunction with the [LOCATE] button to set
the Keypad Timecode Input mode.
H REHE button & indicator
This button is used to engage Rehearsal Standby mode and, when pressed together with
the [PLAY] button, punch in rehearsal. In Rehearsal mode, recording can be practiced,
with automatic playback and input monitor switching at the punch in and out points,
without actually recording anything to disk. The REHE button indicator flashes in
Rehearsal Standby mode, and lights up continuously during rehearsal.
I REPEAT button & indicator
This button selects the A–B Repeat playback function. The REPEAT indicator lights up
when this function is on.
J REW button
This button is used to start rewind. Press it once for rewind at 8x normal play speed, the
REW button indicator flashes. Press it again for rewind at 16x normal play speed, the
REW button indicator lights up continuously. Pressing and holding the REW button
during playback rewinds at 8x normal play speed.
K FF button
This button is used to start fast forward. Press it once for fast forward at 8x normal play
speed, the FF button indicator flashes. Press it again for fast forward at 16x normal play
speed, the FF button indicator lights up continuously. Pressing and holding the FF but-
ton during playback fast forwards at 8x normal play speed.
L STOP button
This button is used to stop playback, recording, rehearsal, rewind, and fast forward, and
to cancel Rehearse Standby mode. The STOP button indicator lights up when the D24
is stopped.
M PLAY button
This button is used to start playback, punch out of recording or rehearsal, and in con-
junction with the [REC] and [REHE] buttons, punch in for recording or rehearsal,
respectively. The PLAY button indicator lights up during playback, recording, and
rehearsal.