Zanussi ZHC 955 - Manual (Page 12)

12
Installation
Fig. 6
Mounting accessories included
1 deflector (+ spacers adapter)
2 metal screws 3,5 x 13 (to fix spacers adapter to
deflector).
2 metal screws 3 x 9 (to fix upper chimney
section)
12 metal screws 3,5 x 9,5 (6 to fix motor unit to
lower part of the hood, 4 to fix deflector to
chimney support, 2 to fix lower chimney
section)
1 chimney support (3 pieces to assemble)
4 metal screws 4 x 8 (to assemble the chimney
support)
5 wood-screws 5 x 45 mm (for wall mounting)
5 wall plugs Ø 8 mm (for wall mounting)
1 allen spanner (for TORX 10/20 screws)
1 support bracket
Assembling the chimney flue
support/bracket (3 parts):
The three parts should be fixed with 4 screws,
the support extension is adjustable and should
correspond to the internal width of the
telescopic chimney flue. Fig. 6.
Assembling the deflector
(3 parts – only for recirculation
mode):
The three parts should be fixed with 2 screws,
the deflector extension is adjustable and should
correspond to the width of the chimney flue
support, to which it is then fixed. Fig. 6.
=
=
X
X
H
=
=
X
F
F
G
G