X-Micro Tech. Bluetooth USB Dongle User Manual
Page 41
37
H
A R D W A R E
S
E T T I N G S
The Hardware tab of the Bluetooth Configuration Panel provides basic information about
the Bluetooth hardware installed on this computer and access to the Advanced Settings
dialog box, if required:
•
Devices:
§
Name: the name of the device, e.g., WIDCOMM Bluetooth Device
§
Type : the type of device, e.g., USB.
•
Device Properties:
§
Device status : indicates that the device is operating properly or that there is a
problem/conflict.
§
Manufacturer: the name of the company that manufactured the device
selected in the Devices section of this dialog box.
§
Firmware Revision: the manufacturer's firmware version number.
§
Device Address: the Bluetooth Device Address (BDA or BD_Addr) assigned
to this device when it was manufactured.
§
HCI Version: the version number of the Bluetooth Specification that the Host
Controller Interface complies with.
§
HCI Revision: the revision number of the Bluetooth Specification that the
Host Controller Interface complies with.
§
LMP Version: the version number of the Bluetooth Specification that the
Link Manager Protocol complies with.
§
LMP Sub Version: the sub-version number of the Bluetooth Specification
that the Link Manager Protocol complies with.
•
The Advanced button: displays the Advanced Settings dialog box, which allows
you to select the country code and transmission power settings. This option is not
available on all systems.