ZALMAN TNN 500AF - Manual (Page 22)

TNN 500AF
1) Opening and Disassembling the TNN500AF Case
As shown in the diagram, lay the TNN500AF down on a flat surface and open the front door.
Open the latch with the key.
Unscrew four bolts (PH M5x15-S) on the Left Heatsink Plate and open the plate as shown.
Remove the blocks and Heatpipes in an orderly fashion using a screwdriver and store them
in a safe place.
The Bushings and the bolts separated at the
time of the CPU Block s removal are simply
for packaging purposes and are not used for
the actual assembly of the system.