Zyliss PowerLite 835p - Manual (Page 17)

Epson PowerLite 835p
10/04 Epson PowerLite 835p - 17
6. Click the projector you want to connect to and click the
Connect button. If more than one projector is listed, you
can select additional projectors and connect to them at the
same time.
7. If you are prompted for a keyword, enter the four-digit
number displayed on the EasyMP Network screen and click
OK .
The computer’s image is transmitted to the projector and
appears on the screen.
Switching Between Users
To connect to the projector while another person is already
using it (Access Point mode only), follow these steps.
1. Start NS Connection. You see this screen:
2. Select the projector you want to use and click Connect .
You see this message:
3. Click Yes to connect.
The other user is automatically disconnected and notified
about the interruption:
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
Use a canister of compressed air to remove dust.
To remove dirt or smears on the lens, use lens-cleaning paper.
If necessary, moisten a soft cloth with lens cleaner and gently
wipe the lens surface.
Caution: Do not use glass cleaner to clean the lens.
Cleaning the Projector
Before you clean the case, first turn off the projector and
unplug the power cord.
To remove dirt or dust, wipe the case with a soft, dry,
lint-free cloth.
To remove stubborn dirt or stains, moisten a soft cloth with
water and a mild detergent. Then wipe the case.
Caution: Do not use wax, alcohol, benzene, paint thinner, or
other chemical detergents. These can damage the case.
Cleaning the Air Filters and Vents
Clean the air filters and air intake vents after every 100 hours
of use. If they are not cleaned periodically, they can become
clogged with dust, preventing proper ventilation. This can
cause overheating and damage the projector.
Note: To order replacement air filters, request part number
V13H134A07.
Follow these steps:
1. Turn off the projector. Wait for the Power light to stop
flashing, then unplug the power cord.
2. To clean the intake vents, use a small vacuum cleaner
designed for computers and other office equipment. If you
don’t have one, gently clean the vents with a soft brush
(such as an artist’s paintbrush).
Select projector