Xirlink IBM PC & Net Camera - Manual (Page 10)

9
*Note: IBM Net Camera Pro Only
Inputting video from an external device via the video-in / NTSC port:
1. Under Settings, Select Video Source.
2. Make sure the NTSC cable (included) is inserted into Video-In of
the IBM Net Camera Pro. Connect the other end into Video-Out of
your source device.
3. To capture your video to your IBM Camera Application, press Play
from your video source device. From the IBM Camera Application,
click the Capture button to begin recording. To end, click Stop.
4. Preview your captured video clip. To save to Album, click Stop
during preview or let preview finish. Click Save. Your video will be
saved in the .AVI file format.
Note: To record audio with your video, you must have an External
Audio Input on your Sound Card. Insert the audio cable into Audio-
Out of your source device. Insert the other end into Audio-In of
your Sound Card (Audio cable is not included) .
5. Advanced Settings
a. Color Control / Lighting: Adjust the color
settings to optimize the image quality.
b. Compression Control
* : The higher the
compression rate, the smaller the file
size. Best Frame Rate Compression
will reduce file size by 8-10x the original
size. Best Quality Compression will
reduce the file by 2-4x the original.
c. Video Source
* : If viewing video from an
external video source via the NTSC port,
you must select the alternative video
source input control.