Zanussi ZGW 1302 X - Manual (Page 9)

17
You are able to clear the following defects:
• When the cooking zone does not heat up after you
switched it on?
=> Make sure that the fuse is turned on.
• You hear a buzzing when you heat up a zone?
=> This is no defect. It stops with increasing heat.
• Discolouring of a cooking zone?
=> This is not a change in the material but burnt and
not removed food remains. They do not affect the
function and the durability of the ceramic hob.
Before calling the customer service make sure that
the hob was operated correctly and the fuse is not
blown out.
Repairs on electrical appliances must be undertaken by
qualified electricians only. Improper repairs can cause
serious harm and danger for users. The appliance is only
disconnected from the mains when the fuse is turned off
or the mains connection is interrupted
Attention!
If any fissures or cracks appear on the hob's surface the
hob has to be switched off immediately. Disconnect
the appliance from the mains and inform the service
department.
Important!
Following details are necessary for the service depart-
ment:
• type ......................................................
• model ......................................................
• product-no. ......................................................
You will find these details under "Technical data", page
13, on the rating plates.
Technical changes are subject to modification.
What to do in case of a defect