Zoom Series 1057 - Manual

P C I M O D E M
This Quick Start describes PCI modem installation for
computers using Windows
® 98, Me, 2000, or XP .
Quick Start
Make sure you have the following:
 modem  telephone cord  software CD
 free PCI slot in your computer
Important: You must run the setup software before installing the
modem card.
If your computer already has an internal PCI modem
installed, you should remove the modem and its drivers now.
Your old modem may interfere with the installation of your new
modem. Please refer to page 6 now.
Installing the Drivers
1
Your computer should be on. Close any running
applications.
Insert the CD that came with your modem into your CD-
ROM drive. If the CD does not start automatically, double-
click My Computer on your desktop; then double-click the
icon for your CD-ROM drive. If the installation program
doesn’t begin immediately, double-click Setup.exe.
2
When the main installation menu opens, click Install
Modem Drivers and then click PCI Drivers.
The installation program runs and automatically copies
driver files to your hard drive. Follow the prompts.
3
When asked whether or not you want to restart your
computer, select No, I will restart my computer later,
click Finish, return to the CD’s main menu, exit, and shut
down manually. Continue with Installing the Modem
Card, below.