Controls and their functions, English – Yamaha YST-SW015 User Manual

Page 9

Advertising
background image

English

E-

5

CONTROLS AND THEIR FUNCTIONS

1

Power indicator
Lights up in green while the subwoofer is turned on.
Lights up in red while the subwoofer is in the standby
mode.

2

STANDBY/ON button
Press this button to turn on the power. (The power
indicator lights up in green.)
Press again to set the subwoofer in the standby mode.
(The power indicator lights up in red.)
* This button can be used only when the POWER (

7

)

switch is set in the ON position.

Standby mode
The subwoofer is still using a small amount of power
in this mode.

3

B.A.S.S. (Bass Action Selector System) button
When this button is pressed in to the MUSIC position,
the bass sound in audio software is well reproduced.
By pressing the button again so that it pops out at the
MOVIE position, the bass sound in video software is
well reproduced.

INPUT

/MONO

OFF LOW HIGH

AUTO

STANDBY

NORM REV

PHASE

POWER

ON

OFF

110V–120V

220V–240V

VOLTAGE

SELECTOR

SUBWOOFER SYSTEM YST-SW015

STANDBY/ON

B.A.S.S.

HIGH CUT50–150Hz VOLUME 0–10

INPUT

/MONO

OFF LOW HIGH

AUTO

STANDBY

NORM REV

PHASE

SUBWOOFER SYSTEM YST-SW015

STANDBY/ON

B.A.S.S.

HIGH CUT

50–150Hz

VOLUME

0–10

POWER

ON

OFF

110V–120V

220V–240V

VOLTAGE

SELECTOR

2

4

5

1

3

9

8

0

7

6

Rear panel (General model)

Front panel

Port

MOVIE MUSIC

4

HIGH CUT control
Adjusts the high frequency cut off point.
Frequencies higher than the frequency selected by this
control are all cut off (and no output).
* One graduation of this control represents 10 Hz.

5

VOLUME control
Adjusts the volume level. Turn the control clockwise to
increase the volume, and counterclockwise to
decrease the volume.

6

VOLTAGE SELECTOR switch
(For China, Korean and General models)
If the preset setting of the switch is incorrect, set the
switch to the proper voltage range (220V-240V or
110V-120V) of your area.
Consult your dealer if you are unsure of the correct
setting.
WARNING
Be sure to unplug the subwoofer before setting the
VOLTAGE SELECTOR switch correctly.

50 Hz

60 Hz

70 Hz

80 Hz

90 Hz

140 Hz

130 Hz

120 Hz

110 Hz

100 Hz

150 Hz

SW015(UB) (02.11.5)a

02.11.5, 3:13 PM

5

Advertising