Yamaha CDM-900 - Manual (Page 9)

9
English
To play a specific track on the disc
DIRECT PLAY
1 Select a desired track using the number buttons.
SKIP PLAY
To skip to a succeeding track, press SKIP once or
repeatedly until the desired track number appears.
To skip to the beginning of the current track, press
SKIP
once.
To skip to a preceding track, press SKIP repeatedly until
the desired track number appears.
Example: To select track 25,
press 2, then 5.
1 Press DISC and the number button of the desired disc.
To play a specific disc
1
6 7 8 9 0
2 3 4 5
The selected disc number is displayed.
Example: To select disc 105,
press 1, then 0, then 5.
PLAY
* If you enter a number that is higher than the last track
number on the disc, the final track is played.
Notes
• These operations can also be performed when the unit is in
the pause or stop mode.
• If SKIP is pressed and held, the track number successively
changes to higher numbers (or lower numbers).
1
6 7 8 9 0
2 3 4 5
The selected track number is displayed.
2
Press to start play.
SKIP
SKIP
DISC
2
Press to start play.
You can also select the disc with the JOG dial on the front
panel. In this case, turn the JOG dial on the front panel until
the desired disc number appears in the display.
SKIP
DISC
ALL
DISC TRACK
1
6
11
16
2
7
12
17
3
8
13
18
4
9
14
19
5
10
15
20
1
0
5
Note
• If there is no disc in the slot you select, the unit plays the disc
in the next slot up which contains a disc.
5 2