Enable 802.1x – Xerox 7675 User Manual
Page 125
123
Enable 802.1X
At the Machine:
1.
Press the [Log In / Out] button to enter the Tools pathway.
2.
On the keypad enter [admin], then [1111] or the current password. Touch the [Enter] button when
finished.
3.
If necessary, press the [Machine Status] button, then the [Tools] tab.
4.
Touch the [Connectivity and Network Setup] button.
5.
Touch [Advanced], then [Network Settings…].
6.
At the Warning screen, touch [Continue].
7.
Touch [802.1X].
8.
Touch [Enable].
9.
Select the Authentication Method (EAP type) used on your network.
10. Touch [Username].
11. Enter the user name required by your authentication switch and server.
12. Touch [Save].
13. Touch [Password].
14. Enter the password required by your authentication switch and server.
15. Touch [Save].
16. Touch [Close].
17. The network controller will now reset taking the machine off line for several minutes.
18. When the machine comes back on line, if the Tools screen is still displayed, with a message indicating
that you are still logged in as Administrator, press [Log In / Out] to log off the machine.