E)lfe level, F)dynamic range, G)audio set – Yamaha RX-V757 User Manual

Page 63

Advertising
background image

61

SET MENU

A

D

V

ANCED

OPERA

TION

English

Low-frequency effect level

E)LFE LEVEL

Use to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer or headphones. The LFE channel carries low-
frequency special effects which are only added to certain
scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
Choices: –20 to

0

dB

Speaker

SPEAKER

Select to adjust the speaker LFE level.

Headphone

HEADPHONE

Select to adjust the headphone LFE level.

Depending on the settings of “LFE LEVEL”, some signals may
not be output from the SUBWOOFER OUTPUT jack.

Dynamic range

F)DYNAMIC RANGE

Use to select the amount of dynamic range compression to
be applied to your speakers or headphones. This setting is
effective only when the unit is decoding Dolby Digital and
DTS signals.
Choices: MIN (minimum), STD (standard),

MAX

(maximum)

Speaker

SP

Select to adjust the speaker compression.

Headphone

HP

Select to adjust the headphone compression.

Select MIN if you regularly listen at low volume levels.

Select STD for general use.

Select MAX to preserve the greatest amount of
dynamic range.

Audio settings

G)AUDIO SET

Use to customize this units overall audio settings.

Muting type

MUTING TYPE

Use to adjust how much the mute function reduces the
output volume.
Choices:

FULL

, –20dB

Select FULL to completely halt all output of sound.

Select –20dB to reduce the current volume by 20 dB.

Audio delay

AUDIO DELAY

Use to delay the sound output and synchronize it with the
video image. This may be necessary when using certain
LCD monitors or projectors.
Choices:

0

to 160 ms

Tone bypass

TONE BYPASS

Use to select whether audio output bypasses tone control
circuitry when TREBLE and BASS are set to 0 dB (see
page 31).
Choices:

AUTO

,

OFF

Select AUTO if you want signals to bypass tone control
circuitry to provide the purest signal possible.

Select OFF if you do not want signals to bypass tone
control circuitry.

Note

. SPEAKER;;;;;;0dB

HEADPHONE

;;;;0dB

[ ]/[ ]:Up/Down
[<]/[>]:Adjust

p

p

E)LFE LEVEL

. SP: MIN STD)MAX

HP: MIN STD

)MAX

[ ]/[ ]:Up/Down
[<]/[>]:Select

p

p

F)DYNAMIC RANGE

. MUTING TYPE;;FULL

AUDIO DELAY

;;0ms

TONE BYPASS

;;AUTO

[ ]/[ ]:Up/Down
[<]/[>]:Select

p

p

G)AUDIO SET

Advertising
This manual is related to the following products: