Test print or scan – Xerox COPYCENTRE M20I User Manual
Page 52
Page 2-28
Xerox CopyCentre C20, WorkCentre M20 and WorkCentre M20i User Guide
G
ett
ing St
arted
Test Print or Scan
To ensure the Xerox WorkCentre M20 or M20i has been installed correctly a test print or scan
should be submitted from the Workstation.
Test Print
Perform the following steps:
¾
Open a document on the Workstation.
¾
Select the Xerox WC M20 Series as the printer to which the document will be sent.
¾
Print the selected document on the device and verify that it prints correctly.
The installation process is now complete.
Test Scan
¾
Open the Twain compliant application being used to scan documents.
¾
Follow the instructions provided in “Scan” starting on page 8-1 to scan a document and
verify that it scans correctly.
The installation process is now complete.
1
2
3
1
2