Yamaha DSP-AX750SE - Manual (Page 31)

29
English
AUTO SETUP
PRE
P
ARA
T
ION
■ If a warning screen appears
1
Press j / i to display detailed information
about each warning.
For details about each message, see page 30.
y
Warnings let you know about potential problems detected
during auto setup. Warnings will not cancel the auto setup.
2
When you are finished, press SELECT.
The RESULT:EXIT screen appears.
3
Press u / d to select RESULT LIST, then
press SELECT.
The RESULT:WIRING screen appears.
Continue from step 8 on page 28 to display
each result.
• If you change speakers, speaker positions, or the layout of your
listening environment, perform auto setup again to re-calibrate
your system.
• If SWFR PHASE:REV appears in RESULT:WIRING, the SET
MENU “SUBWOOFER PHASE” parameter is automatically
set to REVERSE (see page 59).
• In the DISTANCE results, the distance displayed may be longer
than the actual distance depending on the characteristics of your
subwoofer.
Notes
WARNING:W-1
<OUT OF PHASE>
Reverse Channel
FL
FR
--
--
--
-- --
-- --
[<]/[>]:Select
[SELECT]:Return
RESULT:EXIT
WARNING LIST
. RESULT LIST
)SET CANCEL
[ ]/[ ]:Up/Down
[SELECT]:Enter
p
p
FRONT L ;;;;;REV.
[<]/[>]:Select
[SELECT]:Return
RESULT:WIRING
01EN_00_RXV750_GB.book Page 29 Thursday, February 12, 2004 5:15 PM