Yamaha YAS-70 - Manual (Page 10)

6
En
Getting started
■ Using the remote control
Use the remote control within 6 m (20 feet) of the center system and point it toward the remote control sensor.
• Be careful not to spill liquid on the remote control.
• Be careful not to drop the remote control.
• Do not leave the remote control in the following places:
– hot or humid places, such as near a heater or in a bathroom
– extremely cold places
– dusty places
■ Installing the batteries
• If the effective operation distance of the remote control decreases considerably, replace the batteries with two new ones as soon as
possible.
• Do not use an old battery together with new one.
• Do not use different types of batteries (for example, alkaline and manganese) together. Each type of battery has its own characteristics
even if they are similar in shape.
• If the batteries run out, immediately remove them from the remote control to prevent an explosion or acid leak.
• Dispose of the batteries according to the regional regulations.
• If a battery starts leaking, dispose of it immediately. Be careful not to let leaking battery acid come into contact with your skin or
clothing. Before inserting new batteries, wipe the compartment clean.
Notes
Notes
INPUT STANDBY/ON VOLUME - +
30˚ 30˚
Within 6 m
(20 feet)
1
3
2
1 Take off the battery compartment cover.
2 Insert the 2 supplied batteries (AAA, R03, UM4) according to
the polarity markings (+ and –) on the inside of the battery
compartment.
3 Snap the battery compartment cover back into place.