ZyXEL Communications Prestige 623ME-T - Manual (Page 209)

Prestige 623ME-T User’s Guide
Call Scheduling 25-1
Chapter 25
Call Scheduling
Call scheduling (applicable for PPPoE encapsulation only) allows you to dictate when a remote
node should be called and for how long.
25.1 Call Scheduling Overview
The call scheduling feature allows the Prestige to manage a remote node and dictate when a remote node
should be called and for how long. This feature is similar to the scheduler in a video cassette recorder (you
can specify a time period for the VCR to record). You can apply up to 4 schedule sets in Menu 11.1 —
Remote Node Profile. From the main menu, enter 26 to access Menu 26 — Schedule Setup as shown
next.
Figure 25-1 Menu 26 Schedule Setup
Lower numbered sets take precedence over higher numbered sets thereby avoiding scheduling conflicts. For
example, if sets 1, 2, 3 and 4 in are applied in the remote node then set 1 will take precedence over set 2, 3
and 4 as the Prestige, by default, applies the lowest numbered set first. Set 2 will take precedence over set 3
and 4, and so on.
You can design up to 12 schedule sets but you can only apply up to four schedule sets for a remote node.
Menu 26 - Schedule Setup
Schedule
Set #
------
1
2
3
4
5
6
Name
-----------------
AlwaysOn
______________
______________
______________
______________
______________
Schedule
Set #
------
7
8
9
10
11
12
Name
------------------
______________
______________
______________
______________
______________
______________
Enter Schedule Set Number to Configure=
Edit Name=
Press ENTER to Confirm or ESC to Cancel: