Connecting to an av receiver, Connecting up 02 – Yamaha DVD-S559 User Manual

Page 14

Advertising

Connecting up

Compatibility of this player with
progressive-scan and high-definition TVs

This player is compatible with progressive
video Macro Vision System Copy Guard.

Consumers should note that not all high-
definition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525/625
progressive scan picture problems, it is
recommended that the user switch the
connection to the ‘standard definition’ output
(Interlace). If there are questions regarding our
TV set compatibility with this model, please
contact our customer service center.

This player is fully compatible with the
complete line of YAMAHA products, including
the projectors DPX-1200, LPX-510 and the
plasma monitor PDM-4220.

Connecting to an AV receiver

To enjoy multichannel surround sound you
need to connect this player to an AV receiver
using the digital audio output.

In addition to a digital connection, we
recommend also connecting using the stereo
analog connection.

You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
illustration shows a standard (composite)
connection).

Connect the DIGITAL AUDIO OUT

COAXIAL jack on this player to a coaxial
digital input on your AV receiver.

Use a coaxial cable (similar to the supplied
video cable) to connect the

COAXIAL DIGITAL

AUDIO OUT jack to a coaxial input on your AV
receiver.

Connect the analog AUDIO OUT L/R and

VIDEO OUT jacks on this player to a set of
analog audio and video inputs on your AV
receiver.

• You can use the SCART AV connector, or

the S-video or component video jacks to
connect to the AV receiver if you prefer.

DIGITAL OUT

VIDEO OUT

S VIDEO

COAXIAL

PCM/

q DIGITAL

/DTS/MPEG

COMPONENT

VIDEO

AUDIO OUT

AV receiver

DIGITAL IN
(COAXIAL)