Yamaha RX-V557 User Manual
Page 79
75
SOUND FIELD PARAMETER DESCRIPTIONS
ADDITIONAL
INFO
RMA
T
IO
N
For 6ch Stereo:
Function:
These parameters adjust the volume level for each channel in 6-channel stereo mode.
Control range:
0 to 100%
■
CT LEVEL (Center level)
■
SL LEVEL (Surround left level)
■
SR LEVEL (Surround right level)
■
SB LEVEL (Surround back level)
For PRO LOGIC IIx Music and PRO LOGIC II Music:
■
PANORAMA (Panorama)
Function:
Sends stereo signals to the surround speakers as well as the front speakers for a wraparound effect.
Choices:
OFF
, ON
■
DIMENSION (Dimension)
Function:
Gradually adjusts the sound field either towards the front or towards the rear.
Control range:
–3 (towards the rear) to +3 (towards the front), initial setting is STD (standard).
■
CT WIDTH (Center width)
Function:
Adjusts the center image from all three front speakers to varying degrees. A larger value adjusts the
center image towards the front left and right speakers.
Control range:
0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only
from front left and right speakers)
Initial setting:
3
This parameter can be set only when SUR. STANDARD is selected.
For DTS Neo:6 Music:
■
C. IMAGE (Center image)
Function:
Adjusts the center image from all three front speakers to varying degrees.
Control range:
0 to 1.0
Initial setting:
0.3
This parameter can be set only when SUR. STANDARD is selected.
Note
Note