Safety instructions – Zanussi ZOB143 User Manual

Page 3

Advertising
background image

• Internally the appliance becomes hot when in operation. Do not

touch the heating elements that are in the appliance. Always use
oven gloves to remove or put in accessories or ovenware.

• Do not use a steam cleaner to clean the appliance.
• Before maintenance cut the power supply.
• Do not use harsh abrasive cleaners or sharp metal scrapers to

clean the glass door since they can scratch the surface, which
may result in shattering of the glass.

• If the supply cord is damaged, it must be replaced by the manu-

facturer, an authorized Service or similarly qualified persons in or-
der to avoid a hazard.

• The means for disconnection must be incorporated in the fixed

wiring in accordance with the wiring rules.

• Ensure that the appliance is switched off before replacing the

lamp to avoid the possibility of electric shock.

Safety

instructions

Installation

Warning! Only a qualified person must
install this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Obey the installation instruction supplied

with the appliance.

• Always be careful when you move the appli-

ance because it is heavy. Always wear safety
gloves.

• Do not pull the appliance by the handle.

• Keep the minimum distance from the other

appliances and units.

• Make sure that the appliance is installed be-

low and adjacent safe structures.

• The sides of the appliance must stay adja-

cent to appliances or to units with the same
height.

Electrical connection

Warning! Risk of fire and electrical
shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power sup-
ply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and exten-

sion cables.

• Make sure not to cause damage to the

mains plug and to the mains cable. Contact
the Service or an electrician to change a
damaged mains cable.

• Do not let mains cables to come in touch

with the appliance door, specially when the
door is hot.

3

www.zanussi.com

Advertising