Yamaha R-V302K - Manual (Page 16)

16
DISPLAY PANEL
PRESET
kHz
MHz
MEMORY AUTO
TAPE MON
STEREO
0 20 l00
ms
PRO LOGIC
3 STEREO HALL VOCAL AID LIVE HOUSE
ONE TOUCH KARAOKE
SLEEP
NORMAL WIDE
PHANTOM
EFFECT OFF
1 2 3 5 6
9 B 0 A 7 8
4
1
Multi-information display
Displays various information, for example station frequency,
preset station number and name of selected input source.
2
STEREO indicator
Lights up when an FM stereo broadcast with sufficient signal
strength is received.
3
Signal-level meter
Indicates the signal level of the received station.
If multipath interference is detected, the indication decreases.
4
SLEEP indicator
Lights up while the built-in SLEEP timer is functioning.
5
Center channel mode indicators
The name of a selected center channel mode lights up only
when the DSP program,
PRO LOGIC or 3 STEREO is
selected.
6
EFFECT OFF indicator
Lights up if the digital sound field processor including the Dolby
Pro Logic Surround decoder is turned off by pressing the
SUR/KARAOKE EFFECT button on the front panel or the
EFFECT ON/OFF key on the remote control transmitter when
a normal DSP program (
PRO LOGIC, 3 STEREO,
LIVE HOUSE or HALL) is selected. In this state, sound output
is 2-channel stereo.
7
MEMORY indicator
When the MEMORY button is pressed, this indicator flashes
for about 5 seconds. During this period, the displayed station
can be programmed to the memory by using the A/B/C/D/E
button and the preset station number selector buttons.
8
AUTO indicator
Lights up when this unit is in the automatic tuning mode.
9
TAPE MON indicator
Lights up when the tape deck (or MD recorder etc.) is selected
as the input source by pressing the TAPE (MD) MONITOR
button.
0
DSP program indicators
When a normal DSP program ( PRO LOGIC, 3
STEREO, LIVE HOUSE or HALL) is selected, its name lights
up.
A
ONE TOUCH KARAOKE indicator
Lights up by pressing the ONE TOUCH KARAOKE button on
the front panel. In this mode, you can select one of three audio
output modes according as you prefer. If you select the
“VOCAL CUT” mode, medium frequencies (vocals, etc.) of the
playing source sound are attenuated.
To extinguish this indicator, press the ONE TOUCH
KARAOKE button once or more.
B
VOCAL AID indicator
Lights up by pressing the VOCAL AID button on the front
panel. In this mode, you can select one of three audio output
modes according as you prefer. If you select the “VOCAL
CUT” mode, medium frequencies (vocals, etc.) of the playing
source sound are attenuated only when there is an input from
the microphone(s).
To extinguish this indicator, press the VOCAL AID button once
or more.