3 reset to factory defaults – ZyXEL Communications P-660RU-T V2 User Manual
Page 114
Advertising
Chapter 13 Maintenance
P-660RU-T v2 User’s Guide
114
Figure 62 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default ZyXEL Device IP address
(192.168.1.1). See the appendix for details on how to set up your computer’s IP address.
13.7.3 Reset to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyXEL Device to its factory defaults.
Figure 63 Reset to Factory Default Settings
You can also press the RESET button on the rear panel to restore your ZyXEL Device to its
factory default settings.
Advertising