ZyXEL Communications Prestige 794M - Manual (Page 27)

Prestige 794M User’s Guide
27 Chapter 2 The Web Configurator
2.3 Resetting the Prestige
If you forget your password or cannot access the web configurator, you will need to reload the
factory-default configuration file or use the RESET button on the Prestige. Uploading this
configuration file replaces the current configuration file with the factory-default configuration
file. This means that you will lose all configurations that you had previously and the password
will be reset to 1234, also.
2.3.1 Procedure To Use The Reset Button
1 Make sure the PWR LED is on before you begin this procedure.
2 Press the RESET button for more than six seconds, and then release it. If the SYS LED
begins to blink, the defaults have been restored and the Prestige restarts.
2.4 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the HOME screen.
2.4.1 The Status Screen
The following screen shows the Status screen. This is the first screen that displays every time
you access the web configurator.
Figure 8 Web Configurator: Status
• Click the links in the navigation panel to configure the Prestige features.
• Click the SAVE CONFIG button to save the current settings to the Prestige.